Butt Putty® Crack Filler Gel is a unique crack filler gel which is ideal for filling cracks and voids in any position. It is a two part 1:1 epoxy which will not shrink or sag. Butt Putty Crack Filler can be sanded or sawed once cure is complete.
Butt Putty makes crack repair in masonry, concrete, wood and other surfaces easy. It wont shrink and retains its shape. Forgive the pun but using anything else is just a pain in the….
Butt Putty® Crack Filler Gel is a two part Epoxy with a gel consistency. It is used to fill, bond and reinforce cracks and voids in concrete structures, masonry and wood. Butt Putty® Crack Filler Gel can be used to bond metals and plastics when surfaces have been sanded.
Butt Putty® Crack Filler Gel gets extremely hard when cured, yet still has good impact resistance and no shrinkage. The product also has good water, chemical and heat resistance.
MIXING AND APPLICATION
Mix equal amounts of Parts A and B (use a spoon or spatula) and place side by side on flat metal or plastic surface. Clean each utensil after first use to avoid contaminating the other part. Use spatula to mix the two portions repeatedly until the color is uniform.
Fill the crack by pushing the Butt Putty® Crack Filler Gel into it from each side. When near the surface place a piece of polyester fabric (cut to fit) into the crack and topcoat until smooth and even with the surface.
Working time of mixed Gel is 45 minutes.
Cure takes approximately 12 hours depending on temperature.